ETRS. 5X Advanced Broniew technologies for new imaging horizons! UUUUU. RIBES. LETTO m. El triu. BINIA BRONICA. ETRO. SORER. ZENZA BRONICA. the Zenza Bronica ETRS and is between the lens leaf shutter type single lens reflex Although the following instructions are based on the standard ETRSi. Congratulations on your choice of the Zenza Bronica ETRS (or ETRC) this instruction manual carefully, before you even touch the camera. However, if your .
|Published (Last):||1 October 2007|
|PDF File Size:||5.90 Mb|
|ePub File Size:||9.73 Mb|
|Price:||Free* [*Free Regsitration Required]|
Automatic Close-Up Photography Automatic Close-up Photography Automatic close-up photography is possible with the ETRS, which makes close-up shooting very simple, contrary to the difficulties and limitations normally encountered when taking close-up shots. Enter text from picture: The camera is powered by a 6v PX28A battery with a battery check feature also available. Then, lift the fitting up from the stud.
Film Type Indicator Frame. The battery supplies power for the various electronic control mechanisms incorporated in the Ettr Bronica ETR.
Zenza Bronica ETRS User Manual
These optional accessories should be purchased to suit the user’s eyesight, if necessary. Then, drop the rear end of focusing screen and slide the screen removal lever to the right.
When using Class M and Class F flash bulbs, they will synchronize at the shutter speed settings indicated in the above table. When loading roll film in it’s exclusive film back, do not mistake the dotted line for the starting point, as it is located before the arrow marks.
New features include mirror lockup switch located near the film winding crank. Depress the shutter release button with the ball of the finger. There is an apparent zone of sharpness, both in front and back of the focused subject, which is known as the depth of bronca.
However, the lever is locked to prevent accidental movement and must be unlocked for use.
Shutter Release Button A. A focusing screen with matte center plus full-area fresnel lens outside the center spot is also available. Interchanging Finders and Magnifiers. Intermediate settings are bronics possible.
Don’t waste unsuitable film used in a previous session but simply load up a new film back with the required film type. The shutter will be mechanically controlled when the battery is not loaded or when it is loaded with its polarity marks reserved. However, den pressing the depth of field preview lever will stop the lens diaphragm down to the preselected lens opening aperturepermitting the photographer to check the depth of field effect on the focusing screen.
The film back frame, on the other hand, consists of a maunal with a dark slide slit and a back cover with a film type indicator frame. To get best results from your. The numbers 1 to 8S are full numbers while numbers 2 to are fractions of a second. Therefore, the user should choose the type most suited for their work.
The bbronica magnifier supplied with the waist-level finder has a power of To remove the film back from the main body, insert the Be sure to use and store the battery correctly for obtaining optimum performance from it at all times.
Depress the shutter release button with the ball of the finger. The mechanical setting does not consume any battery power.
Pointers On Shooting See The left-side shafts of both spool holders can be opened outwards, as illustrated. The Bronica ETR is a series of medium format 4. If the green-colored battery check lamp lights up when the wtr check button is depressed, the battery is loaded properly and there is sufficient power for electronically-con trolled operations.
The lens is not properly attached. Pushing the back cover opening button inwards in the arrow indicated direction opens the back cover mabual permits the film holder to be detached. The ETR was released in and is Bronica’s first leaf shutter based camera system. The film can be loaded in the film holder, without detachment from the camera body, and should be loaded in the same manner as explained for the detached film holder. The ETRC released in is almost the same as the regular ETR, the only major difference is that the back is not removable, but uses film inserts.
User Guide for Zenza Bronica Camera, Free Instruction Manual
This page was last modified on 24 Octoberat Camera operations are greatly speeded up because a bright erect image, moving in the same direction as the lens, is observed for composing and focusing. Depress the film back release button and the lower end of the film back can be removed, as illustrated. Depress the battery chamber button with your finger while, at mnaual same manaul, moving the battery chamber cover in the arrow-indicated direction and the cover will come off.
Then, press the lower end of the film back against the body until it locks securely. The film back frame, on the other hand, consists of a base with a dark slide slit and a back cover with a film type indicator frame. The focusing hood will automatically be folded down. Film roll film 15 exposures ; Upon loading the film, tear off the end flap from the empty film package and insert it in the film type indicator frame. To close the focusing hood, first, push down the magnifier if it is flipped up.
Bronica ETR-Si Instruction Manual
The same specifications as the ETRS but without the interchangeable back system. Use a R filter or equivalent with an infrared black-and white film. Filter size 58mm diameter thread mount on 75mm lens; 62mm diameter thread mount on lenses from 40mm to mm focal lengths. In general, more exposure rather than less seems to be a safe guide. The original winders feature a large half-circular flip up crank while other versions have smaller cranks, and one version does not have a crank at all, but a more basic winding knob.
Seiko 0 Shutter speeds: